Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +9108048030256 (International callers) or 08048030256 (Indian callers).
JAGGERY is a product derived from sugarcane juice by removing water content from it.
There are many types of Jaggery available in market as follows :
1. Liquid Jaggery.
2. Solid Jaggery.
3. Powder Jaggery.
4. Organic Jaggery.
5. Khandsari Sugar.
6. Refined Khandsari Sugar.
7. Ayurvedic Sugar.
We at SGM TECH, design and manufacture all types of TURNKEY JAGGERY PLANTS and KHANDASARI by adopting best engineering methods and traditional values.
We use top FOOD GRADE QUALITY RAW MATERIAL for our pans and other system as well. We have our own manufacturing setup which allow us to deliver best quality plants within specified time and best possible price.
We maintain the quality of final JAGGERY to the optimum level specified by government and other food processing standards in our system ensuring good consumer's health.
We appreciate your interest in JAGGERY PLANTS and request your enquiry for the future transactions.
A SUPER HEATER is a device used to convert saturated steam or wet steam into super-heated steam or dry steam.
There are three types of super heaters :
1. RADIANT SUPER HEATER :
Placed directly in the combustion chamber.
2. CONVECTIVE SUPER HEATER :
Located in the path of the hot gases.
3. SEPARATELY FIRED SUPER HEATER :
Totally separated from the boiler.
We at SGM TECH design and manufacture all types of super heaters. We study the client's requirements and design the most optimum solution by adopting best engineering methods.
We use top grade raw materials and modern technology for delivering best quality product in time with best possible price.
We appreciate your interest in Super-Heaters and request the enquiry for the future transactions.
A FAN is a device which is used to supply mechanical energy to the air or gas.
There are two main kinds of industrial fans:
1. Centrifugal fans
2. Axial-flow fans
CENTRIFUGAL FANS :
Centrifugal fans consist of a wheel or a rotor mounted on a shaft that rotates in a scroll-shaped housing. Air enters at the eye of the rotor, makes a right-angle turn, and is forced through the blades of the rotor by centrifugal force into the scroll-shaped housing. The centrifugal force imparts static pressure to the air. The diverging shape of the scroll also converts a portion of the velocity pressure into static pressure.
There are three main types of centrifugal fans:
RADIAL BLADE FANS - Radial-blade fans are used for heavy dust loads. Their straight, radial blades do not get clogged with material, and they withstand considerable abrasion. These fans have medium tip speeds and medium noise factors.
BACKWARD CURVED BLADE FANS - Backward-blade fans operate at higher tip speeds and thus are more efficient. Since material may build up on the blades, these fans should be used after a dust collector. Although they are noisier than radial-blade fans, backward-blade fans are commonly used for large-volume dust collection systems because of their higher efficiency.
FORWARD CURVED BLADE FANS - These fans have curved blades that are tipped in the direction of rotation. They have low space requirements, low tip speeds, and a low noise factor. They are usually used against low to moderate static pressures.
When we design fan for client, we consider the following points :
1. Volume required
2. Fan static pressure
3. Type of material to be handled through the fan
(For example, a radial-blade fan should be used with fibrous material or heavy dust loads, and non-sparking construction must be used with explosive or inflammable materials.)
4. Type of drive arrangement, such as direct drive or belt drive
5. Space requirements
6. Noise levels
7. Operating temperature
8. Sufficient size to handle the required volume and pressure with minimum horsepower
9. Need for special coatings or construction when operating in corrosive atmospheres
10. Ability of fan to accommodate small changes in total pressure while maintaining the necessary air volume
11. Need for an outlet damper to control airflow during cold starts
We at SGM TECH provide all types of fans according to client's requirement. We appreciate your interest in fans and request the enquiry for the future transactions.
A MECHANICAL DUST COLLECTOR is a system used to enhance the quality of air released from industrial and commercial processes by collecting dust and other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector system consists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system.
Five main types of industrial dust collectors are:
1. Inertial separators
2. Fabric filters
3. Wet scrubbers
4. Unit collectors
5. Electrostatic precipitators
MULTIPLE CYCLONE DUST COLLECTORS :
Multiple-cyclone separators consist of a number of small-diameter cyclones, operating in parallel and having a common gas inlet and outlet, as shown in the figure, and operate on the same principle as single cyclone separators—creating an outer downward vortex and an ascending inner vortex.
MULTI CYCLONE DUST COLLECTOR removes more dust than single cyclone separators because the individual cyclones have a greater length and smaller diameter. The longer length provides longer residence time while the smaller diameter creates greater centrifugal force. These two factors result in better separation of dust particulates. The pressure drop of multiple-cyclone separators collectors is higher than that of single-cyclone separators, requiring more energy to clean the same amount of air. A single-chamber cyclone separator of the same volume is more economical, but doesn't remove as much dust.
We at SGM TECH design and manufacture all types of dust collectors. We use best engineering methods for optimum design and efficient performance along with top grade raw materials and modern technology to deliver the product on time and at best possible price. We also provide AUTOMATION on client's demand.
We also provide complete CUSTOM - BUILT, TURNKEY PROJECTS for ASH/DUST HANDLING SYSTEMS based on customer's process and requirements.
We appreciate your interest in Dust Collectors and request the enquiry for the future transactions.
Composite Type Boiler
• Manufactured in the range of 1000 kg/hr to 15,000 kg/hr Capacities with different pressure ratings of 10.54 kg/sq.cm, 15 kg/sq.cm, 17.5 kg/sq.cm, 21 kg/sq.cm.
• Manufactured in both Five Side Membrane Panel and Two Side Membrane Panel Type Furnace Designs.
• Advantages of both Water Tube and Smoke Tube Boilers together.
• High Fuel Combustion Efficiency as Greater Furnace Volume and more Grate Areas.
• Provided with Different type of grates based on type of fuel, capacity of the boiler and application in the process. Available with Fixed Grate/Dumping Grate/Pulsating Grate/Travelling Grate/FBC Grate.
• Manual and Auto Feeding Arrangements are possible.
• Quick Steam Generation and Better performance on Fluctuating Loads.
• Greater Shell Diameters with properly designed shell internals for Better Steam Purity up to 98% Dry .
• Proper Water Circulation Ratios and Greater Heat Transfer Areas Makes Our Boiler more reliable and has longer life of steady operation.
We SGM TECH design and manufacture all types of Composite Boilers according to client requirements. We adopt best standards for designing and best quality raw materials along with best and efficient methods for manufacturing.
Different fuels include Agro-waste, Wood, Husk, Coal as solid fuels, FO, LDO, HSD, LSHS as liquid fuelsand NG, LPG, CNG, Biogass, Producer Gas as gaseous fules. Different types of Grate include Fixed type, CAG type, Dumping type, FBC type.
SGM TECH provides complete TURNKEY PROJECTS of Package Boilers along with high degree of BOILER AUTOMATION with best quality and price along with best delivery periods. We assure efficient working of our state of the art composite boilers for long term operations.
We appreciate your interest in composite boilers and request the enquiry for the future transactions.
A THERMIC FLUID HEATER is an industrial heating equipment, used where only heat transfers are desired instead of pressure. In this equipment, a thermic fluid is circulated in the entire system for heat transfers to the desired processes. Combustion process heats up the thermic fluid and this fluid carries and rejects this heat to the desired fluid for concluding the processes. After rejecting it, this fluid comes back again to the thermic fluid heater and this cycle goes on.
• HEATER Construction is Four Pass Coil Type having single radiant & Double convective Coiles With Shell.
• Designed with proper grate area and furnace volume for efficient burning of solid fuels.
• Proper Furnace Volume is provided For Liquid and Gaseous Fuels for better Combustion Efficiencies..
• Higher boiler efficiencies as designed properly with required heating surface areas based on Fuel Type.
• Available for liquid fuels like LDO/HSD/FO/LSHS, Gaseous fuels like Natural Gas/LPG/Bio-gas and Solid Fuels like Bagasse, Husk, Wood, Coal and other Agro-Wastes.
• Consistent and trouble free performance under 'Normal Operating Conditions'.
• Capacities from 1,00,000 kcal/hr to 100,00,000 kcal/hr with Maximum Thermic Fluid Temperatures ranging From 280 to 400 deg.C. depending on the applications.
We SGM TECH design and manufacture Coil - in - Coil Type Thermic Fluid Heaters and other types as well. We develop Thermal Oil Heaters using Dowtherm, Essotherm 500 etc. oils as thermic fluids.
We adopt best design procedures for designing the thermic fluid heaters. We ensure best quality of raw materials and manufacturing techniques for delivering highly efficient products. International standards adopted by our team guarantee the efficient as well as safe working of the product with high life span.
We study the client's process and determine the capacity of thermic fluid heater. Then consider client's special requirements. After detailed study we design the equipment ensuring customer satisfaction. We also provide high degree of AUTOMATION in all our products.
We appreciate your interest in our product and request your enquiry for future transactions.
A RECUPERATOR is a special purpose counter-flow energy recovery AIR HEAT EXCHANGER positioned within the supply and exhaust air streams of an air handling system, or in the exhaust gases of an industrial process, in order to recover the waste heat. Generally, they are used to extract heat from the exhaust and use it to preheat air entering the combustion system. In this way they use waste energy to heat the air, offsetting some of the fuel, and thereby improves the energy efficiency of the system as a whole.
SGM TECH designs and manufactures all types of RECUPERATORS. We adopt best design methods for efficient working and safety of the product. We provide conventional as well as custom built AIR RECUPERATORS and BOILER RECUPERATORS as our products. SGM TECH also provides high degree of AUTOMATION on client's demand.
We appreciate your interest in Recuperators and request the enquiry for future transactions.
WATER CUM SMOKE TUBE BOILER is a type of boiler in which water circulates in tubes heated externally by the fire. Fuel is burned inside the furnace, creating hot gas which heats water in the steam-generating tubes and steam is generated.
A. OIL/GAS FIRED :
• Shop Assembled with Closely Controlled quality.
• Compact and easy for Transportation.
• Less Erection time due to Package Type Design.
• Good Heat Release Rates in the Furnace and Proper Water Circulation Ratios Ensures High Reliability.
• High Fuel Efficiency up to 90 + 2 % on Fuel Oils such as LDO,HSD,FO,LSHS and up to 92+2 % on Gaseous Fuels like Natural Gas, LPG, Biogas etc.
• Convective Type Super Heater Placed behind Screen Tubes and Convective Bank Tubes, Gives More Life to the Super Heater.
• Soot Blowers are provided for cleaning the heat transfer surfaces periodically thereby maintaining the overall performance of the boiler constant.
• Good Steam Quality is ensured due to presence of properly designed drum internals.
• Provision of refractory layer on bottom membrane wall tubes in the furnace protects the surfaces from getting damaged due to burning of the spilt oil on the bottom surfaces.
• Quick Steam Generation and Can Take Care of Changing Requirement of the Steam in the Process.
• Available with all accessories like Super Heater, Economiser, and Air Pre-Heater as per clients requirements.
• Range of the boilers is available from 5000 kg/hr to 50,000 kg/hr with working pressure Range of 10 kg/sq.cm to 120 kg/sq.cm.
B. SOLID FUEL FIRED :
• Designed as per Latest Amendments of the IBR Code and Other Internationally Recognized Codes and are provided with more than all mandatory safety requirements.
• Suitable to Burn different type of fuels such as Bagasse, Husk, Wood Chips, Brickets, Coal etc.
• Provided with Grates like Fixed Grate/Dumping Grate/Pulsating Grate/Travelling Grate/FBC Grates.
• Quick Steam Generation and Can Take Care of Changing Requirement of the Steam in the Process.
• Provision of Appropriate Grate Area and Furnace Volume ensures complete combustion of the fuel in the furnace.
• Longer life of super heater as its construction is based on the fuel type, its design parameters and proper metallurgy of the super heater tubes and headers used.
• Multi-passes in convection zone makes the boiler efficient and more economical. • Provided with accessories like Super Heater, Economiser, Air Pre-Heater, De-aerator Tanks etc. as per requirement for better performance of the boiler.
• High Overall efficiency combined with reliable operation achieved through accurate computerized thermal and mechanical designs of boiler.
• Range of the boilers is available from 5 TPH to 150 TPH with working pressure Range of 10 kg/sq.cm to 120 kg/sq.cm.
Water Tube Boilers are installed when there is a requirement of high pressure high temperature steam for specific application. These boilers can generate steam with pressure of 160 bar and above.
Different fuels include Agro-waste, Wood, Husk, Coal as solid fuels, FO, LDO, HSD, LSHS as liquid fuelsand NG, LPG, CNG, Biogass, Producer Gas as gaseous fules.
We SGM TECH design and develop all types of Water Tube Boilers with MULTIPLE FUELS according to customer requirement. We use IBR approved design procedures for designing boilers and assure the efficient and safe working of the entire system.
We also adopt different National and International Design Standards for best TURNKEY PROJECTS along with boiler services for our customers in best possible price and timely delivery.
We design state of the art custom CUSTOM BUILT BOILERS with best quality and price.
We appreciate your interest in boilers and request enquiry for future transactions.
PACKAGE BOILER is a COMPACT BOILER used for generation of steam in any type of industry. It can be Water tube or Fire Tube type. Package Boilers can be IBR Boilers or NON IBR Boilers.
• Boiler Construction is Three Pass Fully Wet Back Type.
• Designed with proper grate area and furnace volume for efficient burning of solid fuels.
• Proper Furnace Volume is provided For Liquid and Gaseous Fuels for better Combustion Efficiencies..
• Higher boiler efficiencies as designed properly with required heating surface areas based on Fuel Type.
• Available for liquid fuels like LDO/HSD/FO/LSHS, Gaseous fuels like Natural Gas/LPG/Biogas and Solid Fuels like Bagasse, Husk, Wood, Coal and other Agro-Wastes.
• Good Steam Quality up to 98% dry saturated as large disengaging surface and free board distance in boiler shell.
• Consistent and trouble free performance under 'Normal Operating Conditions.
• Capacities from 50 kg/hr to 6000 kg/hr for Solid Fuels and from 50 kg/hr to 20,000 kg/hr for Oil/Gas Firing are available. Pressure Ratings 10.54 kg/sq.cm, 15 kg/sq.cm, 17.5 kg/sq.cm, 21 kg/sq.cm or as per Clients Requirement
We SGM TECH design and manufacture all types of Package Boilers according to client requirements. We adopt best standards for designing and best quality raw materials along with best and efficient methods for manufacturing.
Different fuels include Agro-waste, Wood, Husk, Coal as solid fuels, FO, LDO, HSD, LSHS as liquid fuelsand NG, LPG, CNG, Biogass, Producer Gas as gaseous fules.
SGM TECH provides complete TURNKEY PROJECTS of Package Boilers along with high degree of BOILER AUTOMATION with best quality and price along with best delivery periods.
We assure efficient working of our state of the art package boilers for long term operations.
We appreciate your interest in package boilers and request the enquiry for the future transactions.
Chat with us
Chat with us
