Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +9108048030256 (International callers) or 08048030256 (Indian callers).
A THERMIC FLUID HEATER is an industrial heating equipment, used where only heat transfers are desired instead of pressure. In this equipment, a thermic fluid is circulated in the entire system for heat transfers to the desired processes. Combustion process heats up the thermic fluid and this fluid carries and rejects this heat to the desired fluid for concluding the processes. After rejecting it, this fluid comes back again to the thermic fluid heater and this cycle goes on.
• HEATER Construction is Four Pass Coil Type having single radiant & Double convective Coiles With Shell.
• Designed with proper grate area and furnace volume for efficient burning of solid fuels.
• Proper Furnace Volume is provided For Liquid and Gaseous Fuels for better Combustion Efficiencies..
• Higher boiler efficiencies as designed properly with required heating surface areas based on Fuel Type.
• Available for liquid fuels like LDO/HSD/FO/LSHS, Gaseous fuels like Natural Gas/LPG/Bio-gas and Solid Fuels like Bagasse, Husk, Wood, Coal and other Agro-Wastes.
• Consistent and trouble free performance under 'Normal Operating Conditions'.
• Capacities from 1,00,000 kcal/hr to 100,00,000 kcal/hr with Maximum Thermic Fluid Temperatures ranging From 280 to 400 deg.C. depending on the applications.
We SGM TECH design and manufacture Coil - in - Coil Type Thermic Fluid Heaters and other types as well. We develop Thermal Oil Heaters using Dowtherm, Essotherm 500 etc. oils as thermic fluids.
We adopt best design procedures for designing the thermic fluid heaters. We ensure best quality of raw materials and manufacturing techniques for delivering highly efficient products. International standards adopted by our team guarantee the efficient as well as safe working of the product with high life span.
We study the client's process and determine the capacity of thermic fluid heater. Then consider client's special requirements. After detailed study we design the equipment ensuring customer satisfaction. We also provide high degree of AUTOMATION in all our products.
We appreciate your interest in our product and request your enquiry for future transactions.
JAGGERY is a product derived from sugarcane juice by removing water content from it.
There are many types of Jaggery available in market as follows :
1. Liquid Jaggery.
2. Solid Jaggery.
3. Powder Jaggery.
4. Organic Jaggery.
5. Khandsari Sugar.
6. Refined Khandsari Sugar.
7. Ayurvedic Sugar.
We at SGM TECH, design and manufacture all types of TURNKEY JAGGERY PLANTS and KHANDASARI by adopting best engineering methods and traditional values.
We use top FOOD GRADE QUALITY RAW MATERIAL for our pans and other system as well. We have our own manufacturing setup which allow us to deliver best quality plants within specified time and best possible price.
We maintain the quality of final JAGGERY to the optimum level specified by government and other food processing standards in our system ensuring good consumer's health.
We appreciate your interest in JAGGERY PLANTS and request your enquiry for the future transactions.
A SUPER HEATER is a device used to convert saturated steam or wet steam into super-heated steam or dry steam.
There are three types of super heaters :
1. RADIANT SUPER HEATER :
Placed directly in the combustion chamber.
2. CONVECTIVE SUPER HEATER :
Located in the path of the hot gases.
3. SEPARATELY FIRED SUPER HEATER :
Totally separated from the boiler.
We at SGM TECH design and manufacture all types of super heaters. We study the client's requirements and design the most optimum solution by adopting best engineering methods.
We use top grade raw materials and modern technology for delivering best quality product in time with best possible price.
We appreciate your interest in Super-Heaters and request the enquiry for the future transactions.
A HOT AIR GENERATOR is a type of heater in which heat is generated by burning fuel and is transferred to the air at ambient temperature which is then heated to the required temperature.
Different fuels include Agro-waste, Wood, Husk, Coal as solid fuels, FO, LDO, HSD, LSHS as liquid fuelsand NG, LPG, CNG, Biogass, Producer Gas as gaseous fules.
We design complete TURNKEY SOLUTIONS for HOT AIR GENERATION SYSTEMS according to customer requirements by adopting best engineering methods for optimized design and efficient working along with safety.
We also have our own manufacturing setup having modern facilities and utilities for fast manufacturing. We use top grade materials and techniques to manufacture the product in least possible time and at best price.
We appreciate your interest in HOT AIR GENERATORS and request the enquiry for the future transactions.
Chat with us
Chat with us
