'range'

A FAN is a device which is used to supply mechanical energy to the air or gas. There are two main kinds of industrial fans: 1. Centrifugal fans 2. Axial-flow fans CENTRIFUGAL FANS : Centrifugal fans consist of a wheel or a rotor mounted on a shaft that rotates in a scroll-shaped housing. Air enters at the eye of the rotor, makes a right-angle turn, and is forced through the blades of the rotor by centrifugal force into the scroll-shaped housing. The centrifugal force imparts static pressure to the air. The diverging shape of the scroll also converts a portion of the velocity pressure into static pressure. There are three main types of centrifugal fans: RADIAL BLADE FANS - Radial-blade fans are used for heavy dust loads. Their straight, radial blades do not get clogged with material, and they withstand considerable abrasion. These fans have medium tip speeds and medium noise factors. BACKWARD CURVED BLADE FANS - Backward-blade fans operate at higher tip speeds and thus are more efficient. Since material may build up on the blades, these fans should be used after a dust collector. Although they are noisier than radial-blade fans, backward-blade fans are commonly used for large-volume dust collection systems because of their higher efficiency. FORWARD CURVED BLADE FANS - These fans have curved blades that are tipped in the direction of rotation. They have low space requirements, low tip speeds, and a low noise factor. They are usually used against low to moderate static pressures. When we design fan for client, we consider the following points : 1. Volume required 2. Fan static pressure 3. Type of material to be handled through the fan (For example, a radial-blade fan should be used with fibrous material or heavy dust loads, and non-sparking construction must be used with explosive or inflammable materials.) 4. Type of drive arrangement, such as direct drive or belt drive 5. Space requirements 6. Noise levels 7. Operating temperature 8. Sufficient size to handle the required volume and pressure with minimum horsepower 9. Need for special coatings or construction when operating in corrosive atmospheres 10. Ability of fan to accommodate small changes in total pressure while maintaining the necessary air volume 11. Need for an outlet damper to control airflow during cold starts We at SGM TECH provide all types of fans according to client's requirement. We appreciate your interest in fans and request the enquiry for the future transactions.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Composite Type Boiler • Manufactured in the range of 1000 kg/hr to 15,000 kg/hr Capacities with different pressure ratings of 10.54 kg/sq.cm, 15 kg/sq.cm, 17.5 kg/sq.cm, 21 kg/sq.cm. • Manufactured in both Five Side Membrane Panel and Two Side Membrane Panel Type Furnace Designs. • Advantages of both Water Tube and Smoke Tube Boilers together. • High Fuel Combustion Efficiency as Greater Furnace Volume and more Grate Areas. • Provided with Different type of grates based on type of fuel, capacity of the boiler and application in the process. Available with Fixed Grate/Dumping Grate/Pulsating Grate/Travelling Grate/FBC Grate. • Manual and Auto Feeding Arrangements are possible. • Quick Steam Generation and Better performance on Fluctuating Loads. • Greater Shell Diameters with properly designed shell internals for Better Steam Purity up to 98% Dry . • Proper Water Circulation Ratios and Greater Heat Transfer Areas Makes Our Boiler more reliable and has longer life of steady operation. We SGM TECH design and manufacture all types of Composite Boilers according to client requirements. We adopt best standards for designing and best quality raw materials along with best and efficient methods for manufacturing. Different fuels include Agro-waste, Wood, Husk, Coal as solid fuels, FO, LDO, HSD, LSHS as liquid fuelsand NG, LPG, CNG, Biogass, Producer Gas as gaseous fules. Different types of Grate include Fixed type, CAG type, Dumping type, FBC type. SGM TECH provides complete TURNKEY PROJECTS of Package Boilers along with high degree of BOILER AUTOMATION with best quality and price along with best delivery periods. We assure efficient working of our state of the art composite boilers for long term operations. We appreciate your interest in composite boilers and request the enquiry for the future transactions.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

WASTE HEAT RECOVERY is a process of recovering ENERGY from waste process outputs. These are custom built equipments or systems designed as per the waste heat available and the process heat load. • These are custom built equipments as per the type waste heat available and the process heat requirements. A detailed study of the clients system is required. • These systems can be designed to recover waste heat from high temperature flue gases of furnaces , DG sets, boilers or any other heat source. • The waste heat recovery can be designed in shell and tube type or water tube type design based on the operating pressure of the system. SMOKE TUBE TYPE WASTE HEAT RECOVERY SYSTEMS : • Package type boilers is an internal furnace Boiler with a three pass, fully wet back & smoke tube type design. The fuel is charged through a charging door to keep the fire going. Package type is designed to provide low cost heating with minimum operational complexity. • Due to proper shell or steam drum diameters, steam volume is more & hence better steam quality. • Steam Quality is better as Properly Designed Drum Internals are Provided. • Provided with accessories like Economiser, Deaerator Tank etc. as per requirement for better performance of the Waste Heat Boiler. • Capacity and Working Pressure of the Waste Heat Recovery is considered as per Customers requirement. • Heat Exchangers and Waste Heat Recovery Boilers are especially made as per codes like IBR 1950 with its Latest Amendments/TEMA etc. WATER TUBE TYPE WASTE HEAT RECOVERY SYSTEMS : • Natural or Forced Circulation Type Configuration is possible. • WHRU system is designed based on the Waste Gases Type and other Basic Design Parameters, Hence Reliable Operation. • Smoke chambers are lined with castable refractory material to protect the inside surfaces. • Simple arrangement of smoke chamber door fixing, facilitate easy periodical tube cleaning. • Finned Tube Construction is available which makes the WHRU compact. • Steam Heat Recovery Boilers are available in both Bi-Drum and Single Drum type arrangements. • Due to proper shell or steam drum diameters, steam volume is more & hence better steam quality. • Steam Quality is better as Properly Designed Drum Internals are Provided. • Provided with accessories like Super Heater, Economiser, Deaerator Tank etc. as per requirement for better performance of the Waste Heat Boiler. • Capacity and Working Pressure of the Waste Heat Recovery is considered as per Customers requirement. • Heat Exchangers and Waste Heat Recovery Boilers are especially made as per codes like IBR 1950 with its Latest Amendments/TEMA etc. WASTE HEAT RECOVERY SYSTEM ranges from single unit to entire system which includes CO-GENERATION SYSTEMS which can generate ELECTRICITY by producing steam from running boiler operating on process outputs. We design WASTE HEAT RECOVERY HEAT EXCHANGERS to TURNKEY CO GENERATION PROJECTS with high degree of AUTOMATION. A detailed study of the clients system is required. Then total waste heat load is determined. Depending on this quantity, Energy generation is calculated. Finally the system is designed for client according to his requirements. We design and manufacture complete custom built waste heat recovery equipments by adopting best designing methods and standards along with best quality raw materials and manufacturing methods at best possible price and least possible time. We appreciate your interest in waste heat recovery systems and request the enquiry for future transactions.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

PACKAGE BOILER is a COMPACT BOILER used for generation of steam in any type of industry. It can be Water tube or Fire Tube type. Package Boilers can be IBR Boilers or NON IBR Boilers. • Boiler Construction is Three Pass Fully Wet Back Type. • Designed with proper grate area and furnace volume for efficient burning of solid fuels. • Proper Furnace Volume is provided For Liquid and Gaseous Fuels for better Combustion Efficiencies.. • Higher boiler efficiencies as designed properly with required heating surface areas based on Fuel Type. • Available for liquid fuels like LDO/HSD/FO/LSHS, Gaseous fuels like Natural Gas/LPG/Biogas and Solid Fuels like Bagasse, Husk, Wood, Coal and other Agro-Wastes. • Good Steam Quality up to 98% dry saturated as large disengaging surface and free board distance in boiler shell. • Consistent and trouble free performance under 'Normal Operating Conditions. • Capacities from 50 kg/hr to 6000 kg/hr for Solid Fuels and from 50 kg/hr to 20,000 kg/hr for Oil/Gas Firing are available. Pressure Ratings 10.54 kg/sq.cm, 15 kg/sq.cm, 17.5 kg/sq.cm, 21 kg/sq.cm or as per Clients Requirement We SGM TECH design and manufacture all types of Package Boilers according to client requirements. We adopt best standards for designing and best quality raw materials along with best and efficient methods for manufacturing. Different fuels include Agro-waste, Wood, Husk, Coal as solid fuels, FO, LDO, HSD, LSHS as liquid fuelsand NG, LPG, CNG, Biogass, Producer Gas as gaseous fules. SGM TECH provides complete TURNKEY PROJECTS of Package Boilers along with high degree of BOILER AUTOMATION with best quality and price along with best delivery periods. We assure efficient working of our state of the art package boilers for long term operations. We appreciate your interest in package boilers and request the enquiry for the future transactions.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: